Pure : https://www.mitchellandking.com/products/pre-wax-cleaner-polish
Titan : https://www.mitchellandking.com/products/high-gloss-car-polish-titan
Monarch : https://www.mitchellandking.com/products/wet-look-car-wax
Prototype 1 : https://www.mitchellandking.com/products/prototype-car-wax
I used many of Mitchell and King Luxury waxes, but in my opinion this is my favorite wax of theirs. It goes on buttery smooth and removing it after it sets up is a breeze. Of course, preparation of the waxing surface is most important, I used a wax removing de com detergent to clean my SUV, I then used Pure to further clean my paint and then used Titan Sealant on my vehicle, though it's not needed to wait that long, I let the sealant setup over night and the next day I again washed my vehicle with just water and then applied the Sumire wax, application of the wax went on smoothly and after 60 minutes I buffed off the wax and in my opinion the results were great, I love the depth and gloss it gave to my paint.
After using soft 99 glaco, I was keen to try this product, well I cleaned my windscreen and rear window, polished it with flawless then applied vision, what a disappointment, I might as well had nothing on the windows, absolutely a waste of an afternoon preparing for glass. I would not recommend this product at all, I have to say this is the first bad product I have used with this company. Sorry John but I am only telling the truth.
Was blown away with Rory very easy to apply and remove depth of wetness second to none highly recommended
Used Glasgow for the first time yesterday on an Audi S3. The wax was very soft and a little went a long way. Took longer than expected to cure but I put that down to either over application or the damp conditions.
The paintwork had PURE, BAVAIRA, TITAN & GLASGOW applied all by hand. What an outstanding finish. The owner sent me the picture today. Thanks M&K.
I applied Wax+ on the Sumire.
This is my favorite spray wax and it is very easy to use.
I captured the autumn sky on the Bonnet.
